“MP” Series Mechanical Leveler
“MP” Series Mechanical Leveler. Standard operable range of 12” above dock level and 12” below dock level; Simple operation with a cam and roller counterbalance system that assures smooth dependable walk down.
Equipment collection · Page 2 of 7
Loading Dock Equipment
153 products in this collection
Dock transfer equipment connects different loading surfaces. Define the height difference, gap and traffic before selecting a transfer device or accessory.
Review the models and documented specifications below. Include transfer geometry, traffic and total moving load in your quote request so the proposed configuration can be checked against your application.
Models in this collection 3 shown
01Share your requirements
Select models and tell us about your application.
02Clarify the details
Our team reviews your request and any open questions.
03Review your quote
Compare the configuration, quantities and included items.
Need help choosing equipment?Talk to our team
Shop by equipment type
Choose a focused collection to narrow your search.
Build one quote request
Select models to compare or request together. Your selection stays available as you browse.
No products selected
Products
Showing 24 of 24 on this page • 153 in this category
Page 2 of 7
“VSH” Series Vertical Storing Hydraulic Leveler
“VSH” Series Vertical Storing Hydraulic Leveler. 4-way high tensile 50,000 minimum yield A572 safety tread plate for deck and lip; 3” high safety run-off guards are included on platform.
“RRH” Series Rail Ramp Hydraulic Leveler
“RRH” Series Rail Ramp Hydraulic Leveler. Easy push button operation for smooth, consistent operation with a hydraulic system that provides for full float at all positions; Power-up and power-down control panel with constant pressure push buttons for safety.
“MEDLF” Series Mechanical Edge Of Dock Lift FreeLeveler
“MEDLF” Series Mechanical Edge Of Dock Lift FreeLeveler. High strength steel safety tread plate for deck and lip 55,000 lb yield tensile; Heavy duty bumper blocks with Tuf-Cord bumpers – projection of 15” from wall.
“HED” Series Hydraulic Edge Of Dock Leveler
“HED” Series Hydraulic Edge Of Dock Leveler. Nema 4 single button control panel provides easy push button operation for smooth, consistent operation; High strength steel safety tread plate for deck and lip 55,000 lb yield tensile.
Portable Steel Yard Ramp
Portable Steel Yard Ramp. 72" long level-off section allows for easy access for "end-loads"; High visibility 8" yellow run-off guards.
“HOLD-TITE®” Automatic Vehicle Restraint
“HOLD-TITE®” Automatic Vehicle Restraint. Push button activation with PLC solid state controls (115 volt - single phase operation); Includes 3 position keyed override.
“TPR™” Automatic Vehicle Restraint
“TPR™” Automatic Vehicle Restraint. Low Profile 9” Carriage - Service Range 9”to 27” Off Grade; Restraining Force In Excess of 30,000 lbs.
“STOP-TITE®” Automatic Vehicle Restraint
“STOP-TITE®” Automatic Vehicle Restraint. Push button activation (115v single phase operation) with automatic light sequencing of inside/outside red/green lights; Designed to accommodate rear impact guard (RIG) outlined in 1998 NHTSA regulation.
“STOP-TITE®” Manual Vehicle Restraint Series
“STOP-TITE®” Manual Vehicle Restraint Series. Designed to accommodate rear impact guard (RIG) outlined in 1998 NHTSA regulation; Manually activated restraint via an operate handle.
Light Communication System (LCS)
Light Communication System (LCS). Yellow polypropylene light housing will not rust, pit or corrode like similar metal units; Shallow depth of unit reduces possible damage to LCS from incoming trailers.
Barrier Lip
Barrier Lip. 5” high standard barrier on deck edge with 7” high optional; Rated to withstand being impacted by a 10,000 lb load moving at 4 m.p.h.
Bar Lift Barrier
Bar Lift Barrier. A standard 1.5 HP self-contained power unit, 115 volt single phase standard; Rated to withstand impacts by a 10,000 lb. load moving at 4 mph.
TS101 Series Fixed Head
TS101 Series Fixed Head. 10” projection with 4” dock bumper; 22 oz. vinyl base fabric.
TS103 Series Curtain Head
TS103 Series Curtain Head. Top of unit is sloped forward to promote water drainage & supported by wood 2"x 4" at wall; Head curtain drop of 24” over side pads.
TS101L Series Fixed Head “L” Side Pad
TS101L Series Fixed Head “L” Side Pad. Head pad over “L” side pads – Standard head pad projection 10” (always 4” less than side pads); Standard “L” style side pad 14” projection with 4” dock bumper.
TS103L Series Curtain Head “L” Side Pad
TS103L Series Curtain Head “L” Side Pad. Head curtain drop of 24” over “L” side pads; Standard “L” style side pad 14” projection with 4” dock bumper.
TS500 Series Counterweighted Adjustable Head
TS500 Series Counterweighted Adjustable Head. TS500-100 models side pads are 10’ high for up to 9’ high opening; TS500-116 models side pads are 11’-6” high for up to 10-’6” high opening.
TS200 Series Inflatable Fixed Head
TS200 Series Inflatable Fixed Head. 12” projection with 4” dock bumper – up to 22” projection available; 22 oz. vinyl base fabric.
TC400 Series Rigid Wood Frame
TC400 Series Rigid Wood Frame. Standard unit is 11’6” wide x 11’ high x 24” projection with 36” curtain drop for up to 10’ x 10’ opening; Side curtains have closed cell neoprene sealing edge, bottom wear panels & fiberglass stays max 16” O.C.
TC300 Series Flexible Steel Frame
TC300 Series Flexible Steel Frame. Standard unit is 11’6” wide x 11’ high x 24” projection with 36” curtain drop for 10’W x 10’H opening; Side curtains have closed cell neoprene sealing edge, bottom wear panels & fiberglass stays max 16” O.C.
TC500 Series Flexible Wood Frame
TC500 Series Flexible Wood Frame. Standard unit is 10’ wide x 10-6’ high x 18” projection with 36” curtain drop for 8’W x 10’H opening; Side curtains have closed cell neoprene sealing edge with reinforced 2 ply bottom panel.
TC900 Series Soft Sided
TC900 Series Soft Sided. Standard unit is 12’ wide x 11’ high x 18” projection with 36” curtain drop for 10’W x 10’H opening; Side curtains have closed cell neoprene sealing edge, bottom wear panels & fiberglass stays max 16” O.C.
TC1000 Series Weather Sentry™
TC1000 Series Weather Sentry™. Standard complete unit for door openings 9’W x 10’H x 18” projection; Minimum of 4” dock bumper projection required for level approach with standard trailers.
Choosing loading dock equipment
Match the equipment to the task
Start your loading dock equipment comparison with transfer geometry, traffic and total moving load. Choose a model around the job it must perform and the space in which it will be used. The product grid is a shortlist, not a substitute for reviewing the individual model specifications. Similar product names can describe different sizes, configurations or operating limits.
Provide dock and vehicle-bed heights, the transfer gap, traffic type and combined weight of the handling equipment and load. Review usable width, grade, securing arrangement and operating conditions. Identify the existing equipment for accessory or replacement requests.
For this collection, useful published fields include Platform Height. Open the individual product pages to compare the recorded values and supporting details. A missing specification is a reason to ask for clarification, not evidence that the product meets the requirement. The filters use the published values exactly as listed and apply to the products on the current page.
Before requesting pricing, note your preferred model, quantity and any configuration requirements. Describe the application in plain language and identify the constraints that matter most. If you are comparing alternatives, select those models for one request and explain whether you need an equivalent option or a different configuration. This helps our team understand the comparison without treating every selected item as a separate purchase.
UNDERSTANDING YOUR QUOTE
What affects pricing?
A quote for loading dock equipment depends on usable dimensions, rated loading, installation and operating mechanism. Quantity can affect the overall proposal, but a discount should not be assumed. Optional features and a different configuration can change the comparison even when the base product looks similar. Identify any custom dimensions or material requirements separately so their feasibility and effect on pricing can be reviewed. Ask for the quoted configuration and included items to be identified clearly before making your decision.
Download equipment catalogsUse the catalog to compare models, then confirm current requirements with our team.
FAQ
What weight should I use when requesting a dock transfer product?
Describe the full traffic load, including the handling vehicle and goods where applicable. Include dock/vehicle heights, gap and usable width. Ratings and suitability depend on the exact product and operating conditions.
What affects the quote for loading dock equipment?
Key variables include usable dimensions, rated loading, installation and operating mechanism. Include quantities and any requested changes so the quote can identify the specific configuration. Custom requirements need review; do not assume every model can be modified.
Can I compare models in the loading dock equipment category in one request?
Yes. Select products using “Include in quote,” review your selection, then open one quote request. Your selected model names and product links are carried into the message. Add the quantity for each item and tell us whether the models are alternatives or items you need together.
What happens after I request a quote?
Our team reviews the models and application details you provide. If more information is needed, we can clarify the requirements before preparing a proposal. Review the model, configuration, quantities and included items in the quote before proceeding.
Related Resources
Warehouse Operations: Eleven Checks for a Practical Improvement Plan
An operations review should produce measurable actions, not a list of broad promises. Walk a complete order from receiving through dispatch and note where the process stops.
Warehouse Hazards: A Walkthrough Organized by Work Area
A warehouse hazard review is more useful when tied to locations and tasks. Walk the building during representative activity and record specific conditions.
Dock Levelers: What to Specify Before Requesting a Quote
A dock leveler bridges the height difference between a loading dock and a vehicle. Its fit depends on the dock, vehicle range and handling traffic.
What Dock Levelers Do—and What They Do Not Replace
A dock leveler provides a transition between the loading dock and a vehicle. It does not by itself resolve vehicle restraint, pedestrian separation or every vehicle-height mismatch.
Loading Dock Productivity: Fix the Transfer Bottleneck
A loading dock combines vehicle movement, goods transfer and pedestrian activity. Improvements should address the point where these flows interfere rather than simply increasing speed.
Loading Dock Equipment: Build a Site-Specific List
A dock equipment list should follow the transfer process. The facility's vehicles, handling equipment and traffic determine what belongs on it.
Need help choosing the right Loading Dock Equipment?
Tell us about your application, height, or workspace requirements and we’ll help you identify the right equipment.
No obligation • Industrial equipment specialists